Sonos Adds Simpler Wi-Fi Streaming to All of Its Speakers (Wired.Com)

Under | Posted by admin | 0 Comments
Sonos Bridge

You no longer need a Bridge to stream music to your Sonos speakers. (Photo: Sonos)
Can’t decide what song to listen to on your Sonos speakers today? You should start with “The Bridge Is Over” by Boogie Down Productions. That’s because you won’t need the $50 Sonos Bridge to stream music to the company’s speakers anymore—but you may still want to use one in many cases.Sonos just announced a firmware update that eliminates the need for the Bridge, which had to be physically connected to a router with an Ethernet cable for any Sonos system to work. Now, you can connect to one or more Sonos speakers directly via Wi-Fi, with no hard-wired connection. During configuration, a speaker will form an ad hoc connection with your mobile device. You can set up one of the speakers to act as a wireless bridge for multi-speaker setups, although there are some limitations as compared to a Bridge setup.The free over-the-air update will go out today, and the new feature is backwards-compatible. All new Sonos speakers will come with the new firmware, and the update is also being pushed out to all older Sonos systems. You’ll be able to choose between a “Standard Setup”—the new way that just uses Wi-Fi—and a “Bridge Setup” that uses the traditional wired-in hub.

According to Nick Millington, vice president of product development at Sonos, the Wi-Fi setup won’t impact performance. Millington says that network reliability and synchronization between speakers won’t be issues, and you’ll get “95 percent-plus” of the performance of a Bridge-equipped system. However, there are still scenarios in which a Bridge will still be the best route.

If you’ve already got a Sonos setup with a Bridge in place, you will likely want to keep it that way. Although the Wi-Fi connectivity is a simpler way to configure a single-room or single-speaker system, Sonos says that the Bridge is still the best way to drive more-elaborate and farther-reaching setups.

For the Wi-Fi-only setup, all speakers will need to be in range of your Wi-Fi router, which means you are limited in terms of speaker placement. And although the Wi-Fi feature will work with the company’s Playbar soundbar by itself, a hardwired Bridge is still required for 5.1- and 3.1-channel Sonos home-theater setups.

We haven’t had any hands-on time with the new “Standard Setup” feature, but it’s a welcome option especially for users of the compact and affordable Play:1. You won’t need a separate piece of hardware to stream music to it, and one less wire and one less gadget are generally good things.

— — — — —

Blog courtesy of Wired.com
(http://www.wired.com/2014/09/the-bridge-is-over-sonos-adds-simpler-wi-fi-setup-to-all-its-speakers/)